INSULATION GLUE
INSULATION GLUE
Code :
Category : INSULATION
Tag : INSULATION GLUE
- Material: Polychloroprene
- Appearance: Black viscous liquid
- Viscosity: 2,000 - 3,000 cPs.
- Solid content: 24.00 - 26.00 %
- High heat resistance: Approx. over 100 oC
- Open tack time: Short
- Application temp: Room temp
- Converage (apply adhesive both surfaces): 200 - 220 g/m2
Product Detail
• A black, air-drying contact adhesive that is excellent for joining seams and butt joints of TPFLEX Pipe and
Sheet Insulations
• Surfaces of materials: dry, clean and free from dust, sand, oil, grease
• Stir TPGLUE well and use short hair brush to apply a layer of TPGLUE on the 2 joining surfaces
• After applying TPGLUE on the surface, wait for the solvent to evaporate about 5-30 minutes depending on the glue content until the surface is dry and sticky
• Time required for 2 surfaces to be bonded:
- Minimum 5 minutes: non-absorbent or non-permeable surfaces such as PVC, PPR, steel pipes.,
- Minimum 2 minutes: with absorbent or permeable surfaces such as TPFLEX insulation.
• Press the surface to get the best bonding.
